Demo entry 6850743

vlan10

   

Submitted by anonymous on Jul 11, 2019 at 07:34
Language: Bash. Code size: 370 Bytes.

Switch>en
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#exit
Switch(config)#int range f0/2-3
Switch(config-if-range)#switchport mode access 
Switch(config-if-range)#switchport access vlan 10
Switch(config-if-range)#int f0/1
Switch(config-if)#switchport mode trunk 
Switch(config-if)#exit

This snippet took 0.00 seconds to highlight.

Back to the Entry List or Home.

Delete this entry (admin only).